How to use Heatoor: set up and adjust your heater in 3 steps
Heatoor works without tools or an installer. Here is how to place it, switch it on, control it with the remote and mount it on the wall if you wish.
Before you start: where to put Heatoor
Heatoor stands on a stable surface or mounts on the wall, near a power socket. Choose the room where you spend time: that is where a space heater is most useful. Keep the front of the unit clear so warm air can flow freely.
The rules for any electric heater: never cover it or dry clothes on it; keep curtains, furniture and paper away from the air outlet; keep it away from water; ideally plug it straight into a wall socket. The user guide in the box gives the distances to respect: it is the reference.
Switching Heatoor on in 3 steps
Plug in the unit
Put Heatoor where you want it, or mount it on the wall, then plug it into a standard socket. No tools are needed to use it standing.
Choose the mode and temperature
Switch it on at the touch panel or with the remote, choose heat (or fan in summer), then set the temperature with the plus and minus keys.
Enjoy, then set the timer
Warm air arrives within moments. Set the timer if you do not want the unit to run longer than needed.
The remote control and touch panel
The same settings are available on the unit's panel and on the remote supplied.
| ON/OFF | Switch the unit on or off |
|---|---|
| Heat / Cold (Cold/Warm on the panel) | Switch between heating and fan |
| Plus and minus | Raise or lower the temperature |
| Timer (Timing on the panel) | Set the timer |
Mounting Heatoor on the wall
The wall-mount kit comes in the box. On the wall, Heatoor frees up floor space and blows warm air from high up, like a wall-mounted air conditioner.
- Choose a solid wall and a socket within reach of the cable.
- Respect the height and distances given in the user guide.
- Check it is level before tightening, then hang the unit.
No electrician is needed: the unit is not wired into the mains, it stays plugged into a socket.
In summer: fan mode
When it is hot, fan mode moves the air in the room without heating it. It gives a feeling of freshness, without cooling the air the way an air conditioner would.
Tips for heating efficiently
- Close the door of the room: the warmth stays where you are.
- Heat the room you are using rather than the whole home.
- Pick a comfortable temperature rather than running at maximum all the time.
- Use the timer in the bedroom or the office.
Frequently asked questions
Do I need an electrician to mount Heatoor on the wall?
No. The kit only holds the unit on the wall; Heatoor stays plugged into a standard socket.
Can I move Heatoor from room to room?
Yes, when it is standing: it is compact and light. Just unplug it and plug it in again in the other room.
How long does it take to warm a room?
A few minutes according to the seller. The real time depends on the size of the room, its insulation and the starting temperature.
What if something goes wrong?
Contact the seller's customer service by phone on +1 (812) 554-5750 or by email at support@get-heatoor.com. Heatoor is covered by a 1-year limited warranty.